LTE910CF CAT 1 Embedded 4G - v15.00 Cellular Socket Modem
The LTE910CF v15.00 Common Footprint (CF) Socket Modem is an LTE Category 1 cellular modem with certifications at AT&T and Verizon cellular network carriers.
It utilizes the Telit LE910C1-NF module as its cellular engine. The LTE910CF v15.00 units operate in LTE bands B2, B4, B5, B12, B13, B14, B66, and B71.
End device certification allows users to implement the LTE910CF in their devices with no further North American carrier certification requirements*
* Verizon may require FOTA and data retry demonstration or full certification. FirstNet requires certification in the user end product.
LTE910CF modems are pin compatible with the full line of Janus CF Plug-In Products.
http://www.telit.com/cellular/4g-modules/xe910-family/
Documentation
Technical Documents
Application Notes
LTE910CF CAT1 v15.00 Features
- Common Footprint (CF) Design
- PCB Mount
- Dimensions: 2.5" x 1.4" x 0.325"
- Data Rate: LTE: 10D/5U Mbps
- Multi-Band Support
• LTE Band 1900 (B2), 1700 (B4), 850 (B5), 700 (B12/B13/B14), AWS-3 (B66), 600 (B71)
• UMTS/HSPA+ Band 1900 (B2), 1700 (B4), 850 (B5),
- TCP/IP stack access via AT commands
- SMS (MO / MT)
- Output power: Class 3 (0.2W, 23 dBm) @ LTE
- Operational temperature range: -40°C to 85°C
- Internal Switching Regulator:
• Input Voltage Range: 4.75 to 5.25Vdc (5Vdc nominal)
• Supply disable via terminal input pin
- Variable logic level (UART/GPIO)
• Adjustable from 1.8 - 5.0Vdc
• Defaults to 2.85v
- SIM Card
• Locking SIM card socket, Mini (2FF size) SIM
- Antenna:
• Cellular and GNSS antennas
• U.FL miniature RF connectors
- GNSS
• Stand alone GPS and GLONASS available at AT command interface
• A-GPS support
• NMEA data
• GNSS antenna connection w/active antenna support
Telit Documentation
For current Telit modules and information, visit:
Telit Module Information
Tech Support
Not sure which CF product is right for your application? Check out the CF product comparison. View CF Plug-In Comparison
Technical Support
|
|
