SACB- 6/3-L-M16-M8 HD
-
Sensor/actuator box
1197413
Sensor/actuator box, application: Standard, connection method: M8 socket Metal, number of slots: 6, number of positions: 3, coding: A, slot assignment: single, status display: Yes, pnp; master cable connection: M16 plug connection 90°, shielding: no
Product details
| General | NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
| General | Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories". |
| Product type | Distributor boxes with M8 to M12 slots |
| Number of positions | 3 |
| Application | Standard |
| Number of slots | 6 |
| Coding | A |
| LED | yes |
| Material | Cu alloy |
| PBT | |
| PUR | |
| Seal material O-ring | FKM |
| Contact material | CuZn |
| Contact surface material | Ni/Au |
| Contact carrier material | PBT |
| Material of contact, master cable side | CU alloy |
| Dimensional drawing |
|
| Width | 30 mm |
| Height | 27 mm |
| Length | 112.4 mm |
| Conductor connection | |
| Connection method | M16 plug connection |
| Tightening torque slot sensor/actuator cable | 0.2 Nm |
| Tightening torque - master cable - plug connection | 1.5 Nm |
| Tightening torque of mounting screw for fixing the housing | 0.8 Nm |
| Pin assignment | |
| Slot/position = Wire color or connection | 1 / 4 (A) = P |
| 2 / 4 (A) = J | |
| 3 / 4 (A) = T | |
| 4 / 4 (A) = S | |
| 5 / 4 (A) = G | |
| 6 / 4 (A) = R | |
| 1-6 / 1 (+ 24 V) = A+M | |
| 1-6 / 3 (0 V) = L+U | |
| Status display present | Yes |
| Max. operating voltage Umax | 30 V DC |
| Local diagnostics | Supply voltage per module Green LED |
| Status display I/O Yellow LED | |
| Nominal voltage UN | 24 V DC |
| Rated current, total | 6 A |
| Max. current carrying capacity per path | 2 A |
| Current carrying capacity per slot | 2 A |
| Sensor/actuator connection system | M8 socket |
| Connection method | M16 plug connection |
| Tightening torque - master cable - plug connection | 1.5 Nm |
| Tightening torque of mounting screw for fixing the housing | 0.8 Nm |
| Tightening torque slot sensor/actuator cable | 0.2 Nm |
| Standard designation | M8 connector |
| Standards/specifications | IEC 61076-2-104 |
| Ambient conditions | |
| Degree of protection | IP67 |
| Ambient temperature (operation) | -20 °C ... 80 °C |
Your advantages
Safety in the field, thanks to molded housing and high degree of protection
Convenient: increased machine availability thanks to quick and easy diagnostics