SparkFun OpAmp Breakout - LMV358

SparkFun OpAmp Breakout - LMV358 (BOB-09816)

This is a simple Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the signal level between the stages, not the feedback path. The bandwidth is set to 15.9kHz by a pair of feedback capacitors, or over 100kHz with the caps removed. The LMV358 opamp can source up to 160mA and works well as a low impedance driver/buffer.

Repository Contents

• /Hardware - Eagle design files (.brd, .sch)
• /Production - Production panel files (.brd)

Documentation

• SparkFun Fritzing repo - Fritzing diagrams for SparkFun products.
• SparkFun 3D Model repo - 3D models of SparkFun products.

License Information

This product is open source!

The hardware is released under Creative Commons ShareAlike 4.0 International.

Please use, reuse, and modify these files as you see fit. Please maintain attribution to SparkFun Electronics and release anything derivative under the same license.

Distributed as-is; no warranty is given.

• Your friends at SparkFun.